Get all the onsite waste water parts you need at friendly prices shipped direct to you.
Quanics Pressure Filters are installed on the pump discharge of septic tank effluent pump systems, to provide a final layer of protection to a decentralized system. A common application would be to filter the effluent before or after it is pumped to an advanced wastewater treatment system. This filter traps suspended solids that might have passed through the pump and keeps them from going to the treatment system. It filters to a level of 1/20 inch. A pressure filter on the pump discharge can significantly reduce the amount of solids escaping the tank. A pressure filter is also highly recommended for use on pressure dosed soil application systems such as low pressure pipe and mounds. There is little in the way of maintenance on these filters except routine inspection. Sometimes these inspections turn up a filter that is clogged after a period of use. If this occurs, the filter is very simply cleaned by unscrewing the clear basin that surrounds the filter screen element. When this is done, the screen element can be pulled out and rinsed off before it is replaced in the filter
Click to download part drawing
Click to download Installation Sheet
Click to download Operation & Maintenance Sheet
Click to download TechData Sheet
Since 2004 Quanics has provided affordable, easy to maintain, on-site septic products and advanced wastewater treatment systems. If you don't see what you need, give us a call or email us and we will promptly respond to your inquiry.
6244 Old LaGrange Road, Crestwood, KY 40014 USA
The Quanics Store
Mon - Fri: 8:00 AM — 4:00 PM
Saturday & Sunday