Get all the onsite waste water parts you need at friendly prices shipped direct to you.
i/o.site provides performance monitoring of electro-mechanical components while keeping everyone connected to information through a simple, easy-to-use web interface. i/o.site can be integrated to remotely monitor any blower, aerator, pump, float switch, or motor; regardless of type or model.
Track water use
Catch motor issues before failure
Use any mobile device or computer
Connect intuitively with simple interface
Monitor any powered on-site system
Set up in under 30 minutes
Dimensions 5.12” x 3.54” x 1.57” (130mm x 90m x 40mm)
Enclosure Rating IP-67 (splashproof, exterior)
Supply Specs 5VDC +/-5%, 1 amp max, center positive jack
Current < 400ma @ 5v
Power Consumption < 2W peak
Number of Current Sensing Circuits 3 (kit comes with one current sensor and one 12V float)
Max Amperage Sensing 10, 20, or 100 amps (depending on component)
Number of Inputs 2 Analog/Digital (float / transducer) + 1 Digital (alarm)
Analog Input Voltage 0 - 3.3V
Input Protection Reverse polarity and overvoltage protection
Internet Connection RJ-45, 6 ft cable (attached)
Connector Cable Length 6 ft
Optimal Operating Temperature 0°C (32°F) to 50°C (122°F)
Note: Additional current sensors or 12V floats can be added when ordering.
Since 2004 Quanics has provided affordable, easy to maintain, on-site septic products and advanced wastewater treatment systems. If you don't see what you need, give us a call or email us and we will promptly respond to your inquiry.
4106 Bernau Ave, Greensboro, NC 27407
The Quanics Store
Mon - Fri: 8:30 AM — 4:30 PM
Saturday & Sunday